1.25 track

R

robert

New member
Joined
Dec 6, 2011
Messages
7
Age
55
Location
il
would like some advice on upgrading track to 1.25 heard i got to change drive wheels is this so
 
I put a 1.25" Predator track in my SX chassis and did not have to change drivers. It did rub on the front heat exchanger protectors unitl is wore itself in. I did not stud it yet but when I do, I think I am probably going to have to go to the 8 tooth drivers to get the clearance needed for the front exchanger.
 
I am running a 02 vmax and a 03 viper with 1.25in ripsaws on the stock 9 tooth drivers. I am also running studs in both with no problem. They are woodys gold diggers 1.325in. But the track you do have to trim down in the track window. I believe I had to trim mine down 1/4in so the track doesn't rub on the tunnel and heat exchanger protectors. Its not a good idea to just let it rub in. I have heard on here of people having the protectors come off and the track rubbing through the front heat exchanger protectors. I also had a buddy that bought a 02 viper with a 1.25in track on it. Once checking it out he found that the track rubbed through the heat exchanger protectors and because of that ruined the track.
 
You must log in or register to reply here.


Back
Top