Well went to 1000ft radar yesterday. Had my sx 700 piped only managed 99.2 with a 150lbs rider. My cousins stock sx 700 with just clutching got 93.7 i think. Fig it would be a little faster seeing I could run 660 at 93 with my piped sx. O well it was fun
Last edited:

staggs65
Moderator
was that @ newport Joe?
YAMMIEGOD3:16
Active member
WHAT GEARING. 116 was best we saw on that sx with your pipes on tar. srx gearing 23/38 3:16 (yammie tony)
my 97 sx piped got 97 mph in 1000 ft. used to be more ,but i put a heavier track on it and long traveled the suspension ,plus im fatter
tedgoesfast
New member
i love people who tell the truth
yes that was newport Stagg. I ran 40/23 gears Yamahagod. But it was still pulling. Thats with a speed track and 168 piks
YAMMIEGOD3:16
Active member
00sxrjoe said:yes that was newport Stagg. I ran 40/23 gears Yamahagod. But it was still pulling. Thats with a speed track and 168 piks

YAMMIEGOD3:16 said:try srx gears if your can next time. 23/38 3:16 (YAMMIE TONY)
I have 37/22 will have to try that. Should I change my primary set up to or not. Mr viper said 8crs are a good speed weight.
Gitterdun1985
New member
Mr Viper knows his shit as so does everyone else on the site, all you can do is test test test.
Chazz
New member
Last year the wife ran 85mph stock 97 sx700 m10 suspension and 1.25" ripsaw track. Cleaned the carbs for the first time on both sleds, so we will see what she does on the 18th, clubs annual run.
The_Paragon
New member
00sxrjoe said:Well went to 100ft radar yesterday. Had my sx 700 piped only managed 99.2 with a 150lbs rider. My cousins stock sx 700 with just clutching got 93.7 i think. Fig it would be a little faster seeing I could run 660 at 93 with my piped sx. O well it was fun
Thats about right. Last weekend I ran 97.5 on my sx... All stock besides for Power inc pipes. Temps were at about 40 degrees F, and its jetted a bit fat, and with the warm temps the rpm's werent quite where they should have been. I'm also about 175lbs.
I also ran 103.7 on my pa's SRX.
Another guy shows up with his SRX and runs 92.2 ... Makes me wonder what the heck he's doing wrong!!
there was a guy there I talk to at radar runs has a 01 srx he could not run over 92mph and he told me he was over turning. I just try to do the best with what I have to work with.
srxman72
Member
What did you end up running for jetting with those pipes? Ill be able to test mine in a week or two.The_Paragon said:Thats about right. Last weekend I ran 97.5 on my sx... All stock besides for Power inc pipes. Temps were at about 40 degrees F, and its jetted a bit fat, and with the warm temps the rpm's werent quite where they should have been. I'm also about 175lbs.
I also ran 103.7 on my pa's SRX.
Another guy shows up with his SRX and runs 92.2 ... Makes me wonder what the heck he's doing wrong!!
Just what hauck rec 150 mains

staggs65
Moderator
Joe, theyre running again @ newport on march 3rd. only 660' this time. running both radar runs and test n tune for the 660 drag guys. cancer benefit.
I'm gonna try to make it if i'm not working. havent had a weekend off in 2 months but right now looks like I'll be off that weekend
I'm gonna try to make it if i'm not working. havent had a weekend off in 2 months but right now looks like I'll be off that weekend
I thought it was going to be 1000ft radar can test tune for 660 but will click radar on for 660

staggs65
Moderator
I hope you're right. I'd rather run 1000ft. that's just the info I got, could be wrong.
I asked on there face book page maine drag racing will let you know
Jeff looks like your right 660. What you do not like to run 660?
Jeff looks like your right 660. What you do not like to run 660?
Last edited:

staggs65
Moderator
I dont mind it, just wanted to open this thing up a bit more that's all.