wwpowers76
New member
im workin on a 95 vmax moutain max 600. just put new pistons and rings in it and if i can get it to start it will only run at full throttle. any ideas, quick fixes?
SXViperGuy
New member
I have had to do this to my viper the last 2 years now and my enduro also what u do is.
Take out the Carbs and cleans the jets and floats the jets will probably be clogged up so find something to push through it and everytine u unscrew something in the Carbs count how many turns it takes to
Get out.
Another questions let me know and it's probably a little confusing but let me know.
Take out the Carbs and cleans the jets and floats the jets will probably be clogged up so find something to push through it and everytine u unscrew something in the Carbs count how many turns it takes to
Get out.
Another questions let me know and it's probably a little confusing but let me know.
wwpowers76
New member
Appreciate the advice. Not confusing at all. Gunna tear into it after work. I'll let you know how it goes. thanks again!
wwpowers76
New member
Carb cleaning fixed my issue. starts and idles on one pull of the cord! thanx again!
Illinoisff133
New member
Sounds like only your main jet is working, pilot jet is clogged up.