EX440 drag minibike

B

bruce bruce

New member
Joined
Feb 8, 2012
Messages
10
Age
63
Location
California
I just picked up a 1976 EX440 motor and was wondering who was the "guy" for performance mods. The motor will be in a drag minibike so I have allot of questions.
 
I'm looking for someone for porting and head mod to get compression up. Going to run MRD mechanical fuel injection from a watercraft on methanol.
 
Here's what it's going in...well something like this.

IMAG00761.jpg
 
Last edited:
toydoc said:
IMO, for what your doing, I would go with Dan Hull A&S Racing.

Or for good Exciter motor mods, Doug Flannery
Click to expand...
I know who Dan at A&S is but does Doug have a shop or website? Thanks, Bruce.
 
I took cylinders off of a phazer and put them on a 440 case works great lots more power and with fuel Injection it would tune in way fast
 
Also I know of some other mods that can really help out.custom pipes And reed spacers I would love tox know where you got the fuel injection.
 
bruce bruce said:
I know who Dan at A&S is but does Doug have a shop or website? Thanks, Bruce.
Click to expand...

If your making a methanol motor, I'd go with someone who has done lots of them, that's more Dan IMO.

Doug has a shop 269-792-0070

What about Ross Liberty out your way? He may not know Exciter motors but he can make some real smoke from alot of motors
 
toydoc said:
If your making a methanol motor, I'd go with someone who has done lots of them, that's more Dan IMO.

Doug has a shop 269-792-0070

What about Ross Liberty out your way? He may not know Exciter motors but he can make some real smoke from alot of motors
Click to expand...

I have a guy that does allot of banshee motors and used to put these Yamaha motors in golf carts. I think the clutch will be the next thing I need to do home work on. Comet 102c I think is what I'm hearing. Thanks for the help toydoc .
 
We raced alot of Jet-skis and Ross Liberty stuff was the best. His pipes would kill anything around. IMO, it would be worth a call anyway, he's in your back yard.
Factory Pipe 707-463-1322

What clutch to use is wide open for you. I'd pick one that your sled buddys has lots of tunning parts for it. I'd run a Arctic Cat driven. They work real well, cheap and cheap to tune. I don't know if your going to find much help for setup because of what your putting it on. I'd put the bike on a ATV dyno and tune the clutching.
 
You must log in or register to reply here.


Back
Top