yankeeslover
New member
ok, once again, Im sorry about starting yet another thread.. I promise once I get over my carb cleaning fears I wont post as many threads for one thing... I don't like to tie all my post together as I said before. Im just wondering what I do tomorrow with the float and needle? I believe that's what I call it. im taking carbs out of motor, open them up, I take out the fuel screw(by counting turns) take out main jet and pilot jet, clean all that stuff real good, but then what do I do with the float? i know i asked this before but im still confused. I read on another thread that i just pull the pin out of the float and it lifts up?? is it one pin? how does this pin come out? once i pull the pin out, does the float come off by itself or is it attached to more parts that need to come off? im afraid to mess with this float and bend it as im not skilled enough to make adjustments to it, but i also want to make sure it is cleaned and good to go.. If anyone would be so kind to walk me thru the float cleaning process i would appreciate it. i am attempting this tomorrow morning.. also is it ok to take all the parts out first then clean it all at once, meaning all the jets and fuel screw then clean them put them all back in?? thanks for the help, and believe me, if i can do this tomorrow with no trouble i will be posting that tomorrow night on this site..thanks again