rocker ski loops

W

webby700sx

New member
Joined
Oct 27, 2012
Messages
20
Age
32
Location
mn
i bought a used pair of skis and the loops on them are red, i have a blue and white sled. if any one has any white or black or blue loops and are looking to sell them let me know. they are rocker skis and the loops have one bolt in front to hold the loop on and one on the back. thanks!
 
If this dont pan out I used krylon fusion (for plastic) with pretty good success. Make sure they are warm and dry before/during painting process.
 
I used the fusion (any paint designed for plastic should be fine) Did you clean them good first? Just thinking previous owner might have waxed them at some point and that may have factored into paint not sticking. I "borrowed" Super1c idea about the dishwasher for clutches. My other idea was to use "plastic dip" you can find it at most auto parts stores. Designed for dipping plier/tool handles into for a better more ergodynamic fit. Comes in all the popular colors. Probably would have to cut some off and run a drill threw the exhisting bolt holes to open them back up, paint worked so I never tried this idea.
 
Last edited:
Any chance they're the same as Polaris? I have a pair of those.

405143691.jpg
 
ok ill have to try that. and the polaris ones are different then the yamaha ones. thanks
 
You must log in or register to reply here.


Back
Top