billo6663
New member
hey guys i bought a 2000 srx 700 with a hauck 4743 helix, with 8BU-00 weights and a primary orange spring (duno what company made it) and the secondary spring is black or grey hard to tell
can i do anything good with this setup
right now its pulls not to bad but revs at 9000rpm
ill have to check the twist on the secondary
can i do anything good with this setup
right now its pulls not to bad but revs at 9000rpm
ill have to check the twist on the secondary
yamyrider
Active member
you are way over reving. You need to bring the max rpm down to about 8500rpm.
I dont know the angle of the hauck helix but can tell you when you get the rpm right you will see a BIG difference in the sled
I dont know the angle of the hauck helix but can tell you when you get the rpm right you will see a BIG difference in the sled