phazer pipe wanted

[marntson]

forgive me if posting here is not allowed. posted in the wanted section about a week ago didnt get much response. thought i might get more hitting the target audience.

looking for a PSI or AAEN pipe for my gf's phazer. i have seen a couple that might be for sale on this forum. pm me if you have one you want to get rid of.

also might be looking for 2 sets of 36 or 38mm vmax carbs if the price is right. thanks, mike

 

[SLICKER]

I wouldn't worry about bigger carbs unless you are going full mod. A single pipe, Boyesen reeds, jet it according to the pipe spec,s and some clutching and you will have a little screammer with over 70 hp that will be reliable for alongtime.

 

[marntson]

sadly enough at 9000 feet you need all the air you can get and still not getting 70 horse =( . but i love it so i have to try.

 

[Mysledblows]

Piped, ported, reeds, thin head gasket (or head mods), 38's, and pod filters made for a screaming little sled. Was good for about 80 - 85 hp and was pretty reliable. Had a hard time keeping a recoil rope in it, but eventually solved that problem with some cable. Needed a little 110 with each tank to keep from rattling the pistons, but at 9000+ you might get by on good pump premium. Have fun. Wish I would have kept mine to play with.