Markbrown14
New member
hey guys just wanted to know what the biggest lug size i could get on my srx 1.25"? and what is a good track? herd ripsaw are good any suggestions
02 SRX track
- Thread starter Markbrown14
- Start date
bluemonster1
LIFE MEMBER ONLY ONCE!!!
I don't like Ripsaw tracks,seem to break lugs off to easily.I have the 1 inch Kimpex on now and that track will not break apart..2 seasons and still looks like day one.You can also try the Cobra tracks for good traction..many others will chime in with there favorite's..but that Kimpex track is tough.
bluemonster1
LIFE MEMBER ONLY ONCE!!!
hey hi mod//how you been???It is almost that time of year again.Can't wait for the white stuff..supposed to be an earlier and snowier Winter out this way..colder and bigger amounts predicted then last winter...should be fun then.How was Summer for you out East??
Yamahakid01
New member
1.5 is the biggest you can run but you have to remove the tunnel protectors from what I have heard I did it hope I heard right lol
bluemonster1
LIFE MEMBER ONLY ONCE!!!
the XTC 700 here we have a 1.5 inch track on it with no protectors..but you will have to gear down and re clutch then with that.
Yamahakid01
New member
I geared down and it has already been reclutched all I need now is a helix that I have to order
Markbrown14
New member
I think I have it narrowed down to either the cobra 1.35" or the ripsaw II 1.25"
bluemonster1
LIFE MEMBER ONLY ONCE!!!
go with that Cobra then,I intalled that in my SXR 144 ".Took it for a spin in the Spring and that track hauls..
Newfoundlander
New member
Do you need to remove the tunnel protectors to run the cobra track?
bluemonster1
LIFE MEMBER ONLY ONCE!!!
thats what I run on my 02 SRX protectors have to be on.james-30 said:
bluemonster1
LIFE MEMBER ONLY ONCE!!!
not sure as I don't have protectors on my SXR with the Cobra.If anything,you may have to trim the areas of track lug where it meets the front exchangersNewfoundlander said:
mile9c1
New member
Last week I received a Ripsaw II 1.25 for my Viper, it looks like the best all around track to me for trail riding. The Cobra has some good reviews too but I just don't think you can go wrong with RSII.
Suprx125
New member
Had almost 9k on my old ripsaw and it was till in great shape. Traded it to a guy for my 144 track.
bluemonster1 said:
This Kimpex Ultimate Traxtion track I'm looking at has 96 1.075 studs right down the middle, Whats does this protector look like? I bought my srx used and there is nothing covering the tunnel? Pictures?
super1c
Super Moderator
Guys were starting to get way off track of marks original post. James please start a new post and we can hook you up. When you do ill shoot you some pics of what they look like mounted.
I bought my '02 with a comaplast energy track on it. I was a little worried with it being a single ply but that track has stood up great! They are cheap too.
My choice would be a 1" hacksaw clipped every third for weight. BUT I have never ridden one with it.
My choice would be a 1" hacksaw clipped every third for weight. BUT I have never ridden one with it.