sxr70001 VIP Member Joined Feb 2, 2006 Messages 527 Location Michigan Oct 25, 2013 #1 Was pulling my aaen's off today to change my track and I noticed that one of my pipes is cracked near the exhaust port on the engine. Its pretty bad. Just wondering if it can be welded? It looks really thin.
Was pulling my aaen's off today to change my track and I noticed that one of my pipes is cracked near the exhaust port on the engine. Its pretty bad. Just wondering if it can be welded? It looks really thin.
staggs65 Moderator Joined Jan 18, 2009 Messages 5,524 Age 50 Location Sabattus, Maine, United States Oct 26, 2013 #2 Sure it can. If it's thin from being worn then that section can be cut out and patched. Any competent tig welder can do it.
Sure it can. If it's thin from being worn then that section can be cut out and patched. Any competent tig welder can do it.
sxr70001 VIP Member Joined Feb 2, 2006 Messages 527 Location Michigan Oct 26, 2013 #3 Thanks for the reply. I took it to a guy today and he said the same thing.
