artic cat piston for a big bore srx

[warrior1100]

hi i read that somewhare ,,,put piston of a 570 bearcat for a make a big bore kit in a srx ,,,anybody hear that before

 

[Luke600r]

Think it was maxx. perf. That used the cat pistons in there big bore kits. But u had to use a spacer plate with the kit to.

 

[YAMMIEGOD3:16]

never heard cat. alot with ski-doo. 3:16 (yammie tony)

 

[warrior1100]

which one piston BRP you here to make a big bore in a srx

 

[vipersrxhouse]

cat 550 pistons were the maxx performance kit
i happen to have a complete set up for one of these if any ones interested

 

[warrior1100]

hi viper,,,give me some detail ,,,i am interest

 

[amatosrx]

U will need a spacer plate with the cat pistons. I have 2 kits that use em.

 

[warrior1100]

hi guys , do have any parts number,,,any picture ,,,???

 

[mrviper700]

theres zero reason to go this route, youll need a spacer plate made up and then you can never remove the added deck clearance from the spacer.

if you want to do a 780, and you want it to run good and make good hp, your way better off using the std wiseco piston.

 

[warrior1100]

theres zero reason to go this route, youll need a spacer plate made up and then you can never remove the added deck clearance from the spacer.

if you want to do a 780, and you want it to run good and make good hp, your way better off using the std wiseco piston.

we have a bad experience with the aftermarket piston,,,, but if we don't have the choice we use Wiseco,,,,, if they have any piston on fit right there that was my preference

 

[t-rav]

I have an 835 big bore from bender that uses pistons wich are still made by bender it's forsale lol

 

[warrior1100]

how much you want for your kit ?

do you pass your srx on a dyno before ?