Hyrax saver axel bolt & bearing

[A couple of bucks]

Hello all,

I have hyfax saver wheels & blocks(the top one in the picture)The bearing currently in it is a 6004 (I think). What bearing is the proper one & where can I find the correct axel bolt. ACE didn't have anything close to the I.D. Of the 6004 that's in it.

 

[srx700c]

Does your set have the shouldered bushing that fits inside the wheel bearing, and up against the mounting block (you can see the "shoulder" part of the bushing in the pic you posted)? If so, that bushing should be sized (ID) properly for the "axle" bolt that threads into the block. The axle bolt would be a standard hardware store fastener, grade 8 would be best.

 

[A couple of bucks]

No..... No bushing. I figured I could shim it out, away from the block with washers.

 

[A couple of bucks]

They must be some solid centering bushing that goes through the center of the bearing that I do not have.

 

[bluemonster1]

you need those bushings that go thru the bearing couple..

 

[Throttle Junkie35]

6004 IS the proper bearing. Its commonly available at Fastenal Napa or any bearing house.

 

[A couple of bucks]

Any ideas on where to get the piece that goes into the bearing.

 

[bluemonster1]

don't know where you can find them,but they are in the pic I have here.Check some farm supply stores maybe.

 

[A couple of bucks]

Does anyone know this manufacturer??

 

[bluemonster1]

the pic above is from Yamaha OEM parts.Maybe Yamaha could hook you up.

 

[bluemonster1]

check out post #10...
http://ri.search.yahoo.com/_ylt=A0S...er-Wheel/RK=0/RS=2lLvH3jyoqLyC62idUzWy4rVVp8-

 

[bluemonster1]

here is the bushing in Yamaha catalogue for $10.95



https://www.yamahapartsandaccessori...ll-billet-wheel-adaptor-bu?b=Snowmobile&d=3|3

 

[A couple of bucks]

Thanks Blue!! That's just the ticket. Now I hope they haven't discontinued them.

 

[bluemonster1]

your welcome !!!! They should have them,they are in their catalogue...good luck.