transfer rod bearings?

[c_steinberg]

Anyone have a # for the needle bearings in the transfer rod pivots? Upon putting my skid in I noticed lots of rust and missing seals. Hope I can get replacement bearings and seals without going to dealer. I have the yamaha part #. Just curious if there is a generic # for the bearings and seals?
Thanks

 

[roudyroy1]

Do you mean relay rods? Post something in the wanted section, I needed some when I did the center shock bearing upgrade and got them for like 10$ with shipping and they were oem.

 

[A couple of bucks]

I know that in our skid, the bearing number in incorporated into the part number. For example, here is a bogie/idler bearing Part Number: 93306-00444-00. If ya look closely , you'll see that it's a 6004 bearing.

 

[A couple of bucks]

What's the specific part number you are wondering about.
http://partstream.arinet.com/Mobile...vTVwXVt6wlK2OA3jXosda78cIqRpjFRdDPYmF4g1.html

http://partstream.arinet.com/Mobile...0r_HeCJelgkqCMbnQrpI78d3VlV6d6xvoONxOek1.html

 

[c_steinberg]

What's the specific part number you are wondering about.
http://partstream.arinet.com/Mobile...vTVwXVt6wlK2OA3jXosda78cIqRpjFRdDPYmF4g1.html

http://partstream.arinet.com/Mobile...0r_HeCJelgkqCMbnQrpI78d3VlV6d6xvoONxOek1.html

Looking for #52 and #53
2 pcs of part #52 (93315-31758-00)
4 pcs of part #53 (93109-17071-00)

 

[A couple of bucks]

Are there any numbers on the bearings you have. Or can you measure the bearing ID. ,OD. & the width? I looked up a 5317 bearing but don't believe it's the one your looking for.

 

[A couple of bucks]

http://bearingsdirect.com/measure_bearing.html

 

[A couple of bucks]

Looking for #52 and #53
2 pcs of part #52 (93315-31758-00)
4 pcs of part #53 (93109-17071-00)

The oil seal in item #53 is the seal that comes with the bearing. RS or 2RS = rubber seal or 2 rubber seals.

 

[c_steinberg]

I'll try and mic em in the next day or two and see what I come up with. Thanks

 

[A couple of bucks]

I'll try and mic em in the next day or two and see what I come up with. Thanks

There aren't any numbers on them?

 

[c_steinberg]

There aren't any numbers on them?

Some seals gone, some seals torn beyond recognition, bearings are rusted beyond belief.
May just make an order from Port yamaha.