383stroker
New member
Is it true that Haucks used race cdi for ansrx are viper a cdi?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Hauck race cdi
- Thread starter 383stroker
- Start date
YAMMIEGOD3:16
Active member
yep 2002 viper cdi . 8ek 3:16 (yammie tony)
Yes but its the non DCS Viper CDI box and it is only "Plug and Play" on the 2001/2002 SRXs.
383stroker
New member
So it has the timing curve of a viper?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Yes as it is the Yamaha Viper box.
383stroker
New member
So it has the timing curve of a viper?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
yes, thats all it is, a viper cdi box with the numbers ground off it.
YAMMIEGOD3:16
Active member
and get sold for $500 lol. 3:16 (yammie tony)
ya, doesnt that just tick ya off if you have bought one....................grrrrrr
Would it be beneficial to put one on a stock srx or not with out heavy engine mods. Have clutching already just looking for a little bit more with out port work. And would this kill the fuel mileage? Thanks
YAMMIEGOD3:16
Active member
don will back me here, race only with these viper cdi,s on srx. 100% no for trail. 3:16 (yammie tony)
383stroker
New member
Yep not very happy to find out that it's just a viper cdi. But I didn't know that when I bought it.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
YAMMIEGOD3:16
Active member
these boxes are 2002 viper only prefix 8ek. 3:16 (yammie tony)
383stroker
New member
That is a very costly viper cdi the time I shipped it into canada.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Danger Dog
Member
Hauck is such an ASSHOLE!
YAMMIEGOD3:16
Active member
well dog, yea, or smart business man. i really believe there were cheater cdi boxes, but very rare and not for the everyday guy that wants to race his buddie 3:16 (yammie tony)
Yamablue
Member
***Resurrecting thread*** I have what I was told is a 2002 Viper Race CDI. I discussed this with Jeff (CPR) and he said it was different than my stock CDI (didn't buy it from him, he just knew about it). It does idle my sled a couple hundred RPM higher than my stock CDI without touching anything other than swapping and restarting. I picked it up when I was thinking about building a lake racer when I got my race ported viper cyls with altered exh port heights and needed the higher RPM. I know i could be completely ignorant of what I have, I'm just conveying how it runs different and what I've been told.
INLINE4
New member
- Joined
- Jan 6, 2006
- Messages
- 260
I really dont know if its true that all they were was Viper CDI's....I remember when I was on the Yamaha racer program Gordy called me about a race CDI for the Viper I had...Needless to say I never did it and won many races with the sled with clutching....And I know for a fact we won the earliest ISR Grass Drag Race and never got due credit for it..
pete_man26
New member
does anyone know what the timing curve is after 9000RPM on the viper CDI. For a guy running 10K what CDI are guys running?
383stroker
New member
Not sure what the timing is but we have 2 sleds on spinning 9600-9800 and the other 9900-10100rpm with a viper 8ek cdi and them seem to work well