catt_tracker
New member
I'm still working on getting my mtn viper dialed in but when I do could I climb with my buddies 07 xrs 800 151? His sled is stock with a can. Thanks in advance!
yammitrip1
Member
is your sled a 144 or a 151? Are you piped? if not the power to weight ratio is pushing towards the 800 xrs, but even if you do get beat by him, tow him home at the end of the race when something on his engine fails.
A couple of bucks
VIP Member
Why do we/I ride Yamahas .........I'd rather ride than wrench.but even if you do get beat by him, tow him home at the end of the race when something on his engine fails.
devinzz1
Active member
Them 07 ptec 800s are a blown bottom end waiting to happen. Everyone i know thats had one had problems after a few seasons.
devinzz1
Active member
I say add pipes. Slimmer higher seat. Raised bars. Running boards. More track. Plus strip everything off that aint needed to drop a few pounds
catt_tracker
New member
I bought a set of pipes, but after reading about lowering the needle clip I'm not sure about doing it. I took the top off the carbs and it is like nothing I've ever seen. Anyone have a video link of how to do it? I've read the articles in the tech section but I'm more of a show me how to do it then a tech guy.
catt_tracker
New member
What length of track?
A couple of bucks
VIP Member
Post #131I bought a set of pipes, but after reading about lowering the needle clip I'm not sure about doing it. I took the top off the carbs and it is like nothing I've ever seen. Anyone have a video link of how to do it?
http://www.totallyamaha.net/forums/...roject!!/page7?highlight=opticool+head+gasket
catt_tracker
New member
Thanks