Aftermarket exhaust for 88 340 ET

Cooper0809

Cooper0809

New member
Joined
Nov 4, 2012
Messages
1,206
Age
40
Location
Fergus, Ontario
I can't believe the leaves have already started to change!!!

just wondering if there's an aftermarket exhaust for these old sleds or something that might work. Any ideas?
 
I saw the pipe on their list before. I have never run one myself. I would say at least double check the jetting to make sure it is safe.
 
I was on there site last night and couldn't find one for my 88'...they all seem pretty expensive anyways. $400-$600 ouch!!
 
the ovation and enticer where pretty much the same sled motor wise. never had an ovation hood up to see the differences underneath.

pretty much the only pipe I have seen other than stock though.
 
Ovation exhaust is different than the Enticer sleds. Ovation wraps and exits the recoil side of the sled. Enticers wrap and exit the clutch side.

Won't work.

Any stock ET 300/340 pipe from 78 on up should fit your 88.

opsled
 
some one told me the other day to try calling hauk about exh. apparently he used to make a pipe for almost everything Yamaha ever made sled wise.
 
You must log in or register to reply here.


Back
Top