02 Viper suspension bushing kits

[TrueBlue]

I am planning to install a new bushing kit in my rear suspension. I know Pioneer performance sells these but is there any others out there & perhaps that make a better kit with different material for my 2002 Viper.

Thank's in advance
Rich

 

[A couple of bucks]

You'll find that the bushings aren't worn out. They were just never fitted properly from the get-go. Cut up some pop cans in strips & shim it up nice and snug. Scissors work just fine.

 

[Maim]

make shure you check the relay rods (bars beside shock) as the bushings for those do not come in the kit. if yours is a pure 02 viper, they will have needle bearings in both rods. my brothers 02 only had them in one rod. the relay ones I have to replace every 2-3 seasons as they wear egg shaped and could not be shimmed in my case.

the pioneer kit is actually all Yamaha oe bushings. bought one for 02 viper and war 2 years ago. just had to redo lower w arm bushings on war. brother sold the viper but his was fine as I had added a grease fitting to his lower w-arm bushings and they where lasting well.