SX Viper Dialing in

[Snowman74]

I found a helix that has 50/40-f (full progressive) & 48/38-f

Any thoughts on full progressive?

 

[Snowman74]

Also found
50/34-.46
54/40-.46
54/38-.46

I do have a Heel Clicker hc-10 kit on its way

Also the red/black spring is a 140/240
The red/blue is 140/200 is that the same as you're thinking?

 

[yammitrip1]

which one is in your stock team secondary? i ran the black/red spring in my set up with a almond red up front. I think running the heel clicker set up that the red/blue will be able to work for you but may need the black/red if it doesnt hold the belt. Thats the bad part about the team setups, you cant adjust anything. Always have to change springs. Also i would just stick to the dual angle, full progressive usually is harder to work with and when i used them i kept reverting back to the just straight dual angles

 

[Snowman74]

The red/black with the 50/42 was what was in the secondary.

 

[yammitrip1]

i would defiantly try that 50-34 .46 and use that with the spring you have in it. Give it a shot. i think that is going to work really good with the heel clickers

 

[yammitrip1]

did you ever get the team to work well?

 

[Snowman74]

Had no snow here this winter so never rode. Stripped the sled down and have been going through everything.