Viper/hauck race cdi timing curve

383stroker

383stroker

New member
Joined
Nov 18, 2008
Messages
194
Location
ontario
Hi guys just wondering if anyone knows what a hauck race cdi timing curve would be?


Sent from my iPhone using Tapatalk
 
I had asked that question a couple years back. There's a post about it. I think Valin had gave me the specs.
 
Yeah just looking for the specs the guys dynoing it want to know


Sent from my iPhone using Tapatalk
 
So does the timing retard above 8500. We a turn that engine to 9700


Sent from my iPhone using Tapatalk
 
Thanks guys. Does it hold 13 degrees above 9000. Reason I am asking one sled we just had ported and high rpm pipes put on and it hits 9200 rpm and falls flat on its face. So are trying to find out what's going on with it.


Sent from my iPhone using Tapatalk
 
383stroker said:
Thanks guys. Does it hold 13 degrees above 9000. Reason I am asking one sled we just had ported and high rpm pipes put on and it hits 9200 rpm and falls flat on its face. So are trying to find out what's going on with it.


Sent from my iPhone using Tapatalk
Click to expand...

Viper CDI drops to 11 degrees at 9250 but I don't know what it does beyond that.
Some guys in the past have locked open the SRX exhaust valves and run the 700 SX CDI...it holds a steady 18 degrees above 7000rpm
The original REAL SRX race CDIs held 11 degrees beyond 8250
 
You must log in or register to reply here.


Back
Top