1995 Phazer 2 torque specs

roudyroy1

roudyroy1

Active member
Joined
Jan 10, 2013
Messages
1,517
Location
ontario GTA
I am doing a track swap on a Phazer 2 and need to know the torque on the suspension mounting bolts, big nut on the drive axle, chain case mounting bolts and cover bolts. If anyone could give me a hand or send me a few pages out of a shop manual that would be great.
 
Suspension mounting bolts - 50 FT/LBS, Drive shaft nut - 61 FT/LBS, Chain housing and caliper body - 35 FT/LBS, Chain case cover mounting bolts 7.2 FT/LBS.
 
Here is the general torque specs from the TECH section.

[TABLE="width: 446"]
[TR]
[TD="colspan: 5"]Bolt Assembly Torque (ft-lb)
The torque values in the table are based on the use of lubricated threads.
[/TD]
[/TR]
[TR]
[TD]Size (mm)
[/TD]
[TD]Grade 8.8 Iron
[/TD]
[TD]Grade 10.9 Iron
[/TD]
[TD]Grade 12.9 Iron
[/TD]
[TD]Aluminum
[/TD]
[/TR]
[TR]
[TD]6
[/TD]
[TD] 5
[/TD]
[TD] 10
[/TD]
[TD] 9
[/TD]
[TD] 4
[/TD]
[/TR]
[TR]
[TD]7
[/TD]
[TD] 9
[/TD]
[TD] 14
[/TD]
[TD] 18
[/TD]
[TD] 7
[/TD]
[/TR]
[TR]
[TD]8
[/TD]
[TD] 17
[/TD]
[TD] 25
[/TD]
[TD] 29
[/TD]
[TD] 14
[/TD]
[/TR]
[TR]
[TD]10
[/TD]
[TD] 33
[/TD]
[TD] 50
[/TD]
[TD] 50
[/TD]
[TD] 25
[/TD]
[/TR]
[TR]
[TD]12
[/TD]
[TD] 60
[/TD]
[TD] 85
[/TD]
[TD] 95
[/TD]
[TD] 40
[/TD]
[/TR]
[TR]
[TD]14
[/TD]
[TD] 90
[/TD]
[TD]133
[/TD]
[TD]145
[/TD]
[TD] 65
[/TD]
[/TR]
[TR]
[TD]16
[/TD]
[TD]140
[/TD]
[TD]200
[/TD]
[TD]210
[/TD]
[TD]100
[/TD]
[/TR]
[TR]
[TD]18
[/TD]
[TD]200
[/TD]
[TD]285
[/TD]
[TD]290
[/TD]
[TD]135
[/TD]
[/TR]
[TR]
[TD]20
[/TD]
[TD]290
[/TD]
[TD]400
[/TD]
[TD]
[/TD]
[TD]
[/TD]
[/TR]
[/TABLE]
 
Last edited:
You must log in or register to reply here.


Back
Top