Power valves

[joejammer]

I have a 98 srx 700 i would like to try to energize the servos to adjust the power valves. On mine there are 4 wires black and red , yellow and blue, white and black, black and yellow. The first color is the wire the second is the stripe. There is also a single wire going to the servos that is white with a red stripe

 

[joejammer]

 

[3g racing]

If you start sled and turn idle down to under 900 rpm the servo should fully open...way easier than hooking up to a battery

 

[super1c]

http://www.totallyamaha.net/forums/...ment-harness?highlight=adjusting+power+valves

The easiest way is what 3g said. But if you want to energize the motor the link above will help ya out. You don't energize through the pv harness you do it through the e start port. Every sled has one regardless if you have estart or not. Was part of harness from factory.

 

[joejammer]

Thanks for the info