Coil wiring 700 triple red head

[troutman]

Can someone tell me sequence to retire my coils on 700 redhead triple 1998 venture. Cleaning carbs today and forgot sequence. I have a black and an orange wire coming from harness. Starting from right anyone know sequence? Any help appreciated. Thanks

 

[super1c]

http://www.zenitram-inc.com/viper.htm. just a shot in the dark. This is for a viper but check wire codes to see if it matches.

 

[sleddineinar]

The coils on a 98 redhead are wired in series & fire all at once, each time one of the cylinders hits TDC. The Viper & 2001 & newer redheads are wired differently.

 

[devinzz1]

All 3 will only go together one way. Male to female and so on.

 

[Devilin AblueDress!]

FYI....a lot easier to just leave coils screwed to air box lid with plug wires still attached. Undo screws holding 2 halves of air box together, unplug the 2 coil wires (long and a short one) and flip the lid to front of motor out of the way. Saves you 3-4 steps taking apart and same 3-4 steps putting it back together.

 

[super1c]

The coils on a 98 redhead are wired in series & fire all at once, each time one of the cylinders hits TDC. The Viper & 2001 & newer redheads are wired differently.

Good to know.

 

[troutman]

Got it. Thanks Chris and everyone for your replys.