Hand grip warmer replacement?

[justin1620]

Hey fellas, I accidentally snipped my right hand warmer wire while trimming grip for handlebar hooks. Looks like yamaha stopped making grips for SRX. I have a 98 SRX, single headlight, does anyone know of a replacement that will plug in instead of buying a whole aftermarket kit? Thanks

 

[max17ime]

Can you re-solder the wire, or is it too close from the handle? I also cut my wire when installing powermadd hooks, but was able to fix it.

I don't think you'll be able to find a new grip from Yamaha (been there). I did have good luck buying used grips in good shape.

I don't know if aftermarket grips will have the same resistance as original.

 

[super1c]

The newer grips from the 300 watr systems do ohm out different then the old style but have run them on the older ignition system of the older sleds for a while now with no problems. Bonus they get hotter. I have run the viper grips on 97 sx's and a 98xt.

 

[justin1620]

Thanks for the info! I'll try a viper set....