Ovation 340 Jetting VM-34

B

blissman20

New member
Joined
Aug 5, 2014
Messages
13
Location
Saskatchewan
Since I purchased my Ovation I have not been able to tune the dual barrel carb for the life of me. I have decided to swap it out for a VM-34 off of a Polaris XLT 600 because they really cheap... around 30-50 per carb. My next issue will be jetting. I have read and read and searched and searched on this forum but havent came up with much for jetting. Can anyone give me an idea on where to start for jetting this carb when i get it
 
Maim said:
try searching for user name lasse as he has done a few mikuni swaps on those sleds.
Click to expand...

Yeah I just checked all of his started threads and I couldnt find anything where he found the jetting that he was looking for. I check out all of his replied threads
 
blissman20 said:
Yeah I just checked all of his started threads and I couldnt find anything where he found the jetting that he was looking for.
I check out all of his replied threads
Click to expand...
I still own the Ovation/CS-340 with the Mikuni VM-34 carburetor.
It works like a champ.
Maybe the jetting is not 100% but it has run good now for a couple of years without any problems and has nearly been beaten to death by the kids.
No hiccups and no bogs what so ever.

:2strokes:
 
Lasse said:
I still own the Ovation/CS-340 with the Mikuni VM-34 carburetor.
It works like a champ.
Maybe the jetting is not 100% but it has run good now for a couple of years without any problems and has nearly been beaten to death by the kids.
No hiccups and no bogs what so ever.

:2strokes:
Click to expand...
That's good to hear, what jetting are you running? What elevation are you?
 
Blissman, how did that jetting work? I had my MV34 delivered today.... I'm way below you guys in elevation but if I have a starting point I think I can do the conversion (or someone can....)
 
You must log in or register to reply here.


Back
Top