C charlie77 New member Joined Jan 7, 2014 Messages 5 Location central new york Apr 14, 2015 #1 The front suspension mounting hole on this sled is almost ripped right through. Is there a fix without an aluminum welder?
The front suspension mounting hole on this sled is almost ripped right through. Is there a fix without an aluminum welder?
Maim Super Moderator Joined Mar 13, 2004 Messages 4,806 Age 50 Location sudbury on. canada Apr 14, 2015 #2 you could always rivet in the pieces from an sxr front mount as there are changeable braces for them. did it on my brothers sx500r 2001. parts are in the foot well and I cannot remember if they are on the bulkhead or tunnel pics.
you could always rivet in the pieces from an sxr front mount as there are changeable braces for them. did it on my brothers sx500r 2001. parts are in the foot well and I cannot remember if they are on the bulkhead or tunnel pics.
C charlie77 New member Joined Jan 7, 2014 Messages 5 Location central new york Apr 15, 2015 #3 thank you
Yamaha Nutz New member Joined Jul 14, 2008 Messages 1,028 Age 45 Location southeast Wi May 8, 2015 #4 replace the front inner plate and then use a thick 3/8'' fender washer with the bolt and keep it tight
replace the front inner plate and then use a thick 3/8'' fender washer with the bolt and keep it tight