Latest activity

grounds test good wont shut off even with the black white wire grounded think it might be the CDI

well according to my old paper book from https://royaldistributing.com/, that sled takes 6004 2rs and 6204 2rs bearings in the wheels...

well according to my old paper book from https://royaldistributing.com/, that sled takes 6004 2rs and 6204 2rs bearings in the wheels...

Looking to pull the suspension next. Parts list says two models of bearings 9330620417 and 9330600441. Is there any way to reference...

I see my mistake, a transporter lite and sx venom was a 397cc single cylinder in 2021 to 2025. Was copy happy...LOL

The twins were only ran from 1997 to 1999 in the proaction chassis. All the SX venoms were triples.

The twins were only ran from 1997 to 1999 in the proaction chassis. All the SX venoms were triples.

What year? Hard to not make a mistake entering in all that info manually.

What year? Hard to not make a mistake entering in all that info manually.

They thickened the head gasket because they were concerned about durability issues as the 94-96's would burn down if running them at...

No matter what if you go thinner head gasket you will need to run premium. The gas today is so crappy I would not risk it. I have never...

I noticed that chart says the SXvenom has 2 cylinders....

I think you're Ok on 87 with the .8mm gasket, but if running the .6mm use premium. These sled are hard on primary clutch parts so keep...

It could be many factors in the older 600. Bore, stroke or just head design and squish. Power block will still need to be tuned to...

I just find it weird 94-96 ran with the 0.6mm gasket on regular and the switched to 1.4mm, hard to find information weather they changed...