2000 Mountain Max Kill Switch

[Ultimax]

I was hoping someone could help me out. The factory kill switch on my sled needs to be replaced. I can't get the switch out because the red stop button needs to be removed and I can't figure out how to get it off the switch without breaking it. Does anyone know how to remove the stop button from the switch itself? Thanks

 

[devinzz1]

is there a screw under the red sticker?

 

[Ultimax]

Kill Switch

It doesn't look like it's removable but I will take a sharp knife and see if I can remove it. Thanks

is there a screw under the red sticker?

 

[devinzz1]

It doesn't look like it's removable but I will take a sharp knife and see if I can remove it. Thanks

Dont know for sure but the image of the button and screw came to mind when i read it ahaha. I will have a quick look at it tomorrow but i believe its like the high/low beam switch.


Sent

 

[snowdad4]

kill switch does have a removable sticker. be careful, its a thin aluminum affair and bends easily. you can flatten it back out if your patient. yes, there is a screw under there, #1 phillips. use some 3m 77 aerosol or tube type weatherstrip adhesive for the re-install.

 

[j5ferry1]

Anyone know of a place to get a replacement foil sticker for the kill switch?

 

[A couple of bucks]

There is different colored foil tape or duct tape or that matter. Farm & Fleet has a wide variety. You could always make one out of some can lid in your recyclables. Mabey a sardine,kipper or spam lid? Grab your tin snips an go to town.

 

[snowdad4]

a knowledgeable dealer will have the part number for the replacement decal/cover. i may have it somewhere if you exhaust all your resources.