Phazer-I/II , Running board... ?

You will have to try them Lasse... and let US know what they are like :D
 
I am putting a set of pro boards on. Fit pretty well with a bit of trimming.

image.jpg
 
Last edited:
So basically I lined up the closest rivet hole on the front under the footwell. One of the rivet holes lines up with the Polaris. Then I removed the back bracket out of the boards and cut the middle slit longer to slide it in further. Then cut the tip off the bracket and drilled a new mounting hole. Bolted the board to the foot well brace up through the bottom by drilling a hole. Basically trace everything out and used a air saw to cut the boards off. They actually fit pretty well and very ridged compared to stock. Never cost much these boards were off a damaged sled. I can get specific pictures if you like, just getting them powder coated now.

Also installing a 141 1 3/4 track, custom seat, new tunnel ext and bumper, higher bars and moved forward , just more rider friendly in the mountains.



image.jpg
image.jpgl
image.jpg
image.jpg
image.jpg
 
Last edited:
Yup pro rmk boards and 141 track. Fit pretty well. Need to bolt seat down and should be good to go.



image.jpg
 
You must log in or register to reply here.


Back
Top