Motodeficient
New member
2003 SX Viper-
Going to clean the powervalves this weekend, but have a question or two about adjustment afterwards.
This thread is very helpful:
http://www.totallyamaha.net/forums/showthread.php/55400-Setting-Your-Power-Valves
But I would like to ask for clarification on these points please:
Step 2. loosen the cables all the way up @ the servo cable adjusters
Does this mean screw the adjuster all the way into the servo body after loosening the locknut? (will probably be more obvious once I start the process)
Step 4. Insert the 2.5mm Allen wrench’s (or other suitable spacer), go back up to the servo and GENTLY tighten the cable adjusters so it pulls the two P/V housings together, so it just touches the wrench (chosen spacer), then pull out wrench and tighten the two bolts and the cable adjuster lock nut.
How do the two bolts that hold the powervalve into the housing tighten after the 2.5mm spacer is removed? How do they tighten without closing the 2.5mm gap?
Thanks in advance for helping a n00b out!
Going to clean the powervalves this weekend, but have a question or two about adjustment afterwards.
This thread is very helpful:
http://www.totallyamaha.net/forums/showthread.php/55400-Setting-Your-Power-Valves
But I would like to ask for clarification on these points please:
Step 2. loosen the cables all the way up @ the servo cable adjusters
Does this mean screw the adjuster all the way into the servo body after loosening the locknut? (will probably be more obvious once I start the process)
Step 4. Insert the 2.5mm Allen wrench’s (or other suitable spacer), go back up to the servo and GENTLY tighten the cable adjusters so it pulls the two P/V housings together, so it just touches the wrench (chosen spacer), then pull out wrench and tighten the two bolts and the cable adjuster lock nut.
How do the two bolts that hold the powervalve into the housing tighten after the 2.5mm spacer is removed? How do they tighten without closing the 2.5mm gap?
Thanks in advance for helping a n00b out!
Last edited: