Bulkhead is okay, if front shocks bottom that causes bulkhead cracks. Most biggest problem is front cooler and sump shield rivets. All rivets are loosen or off. I think i'm going to replace them with long 6.4mm steel rivets and add some aluminium profile.
But today i finally get engine running, that feeling was awesome

One exhaust flange is leaking a little, but i think that i'm going to put some heat silicon, i don't want to cut and weld those pipes anymore. It was pretty annoying job to get everything fit and build those silencers.

Next step is build exhaust gas temperature meter and paint some YAMAHA logo to seat, like original seat. And also i need to find some motivation to create a code for arduino, i already have a 4-channel egt-k "amplifier" and all connectors ready!
I think that it would be most easiest way buy some, but i wan't to make everything by myself.
But today i finally get engine running, that feeling was awesome


One exhaust flange is leaking a little, but i think that i'm going to put some heat silicon, i don't want to cut and weld those pipes anymore. It was pretty annoying job to get everything fit and build those silencers.

Next step is build exhaust gas temperature meter and paint some YAMAHA logo to seat, like original seat. And also i need to find some motivation to create a code for arduino, i already have a 4-channel egt-k "amplifier" and all connectors ready!
I think that it would be most easiest way buy some, but i wan't to make everything by myself.
Last edited: