Heelclicker clutching help, Mr Viper or someone
- Thread starter norwegian
- Start date
you could try a softer belt so it grabs harder but it sounds like you need more traction.
Maybe less wrap on secondary spring would let it shift faster out of the gate, lowering rpm initially.
A couple of bucks
VIP Member
I never worried about that small of an over-rev. But if you are, think about slightly putting a load on the mill.
This is as good as it's going to get:
Primary: Purple maxx perf SRX spring.
0,0 grams in heel
6,5 grams in the middle
6,7 grams in the tip.
2 hauck engagement shims
39 deg helix with a yamaha green sec. spring.
Engagement is about 3850. It revs to about 8000. Really good usable power for trail use. Seems to be "on the pipe" much more than with any other set up.
Hoping to see 90 mph on the dream o meter this season.
Primary: Purple maxx perf SRX spring.
0,0 grams in heel
6,5 grams in the middle
6,7 grams in the tip.
2 hauck engagement shims
39 deg helix with a yamaha green sec. spring.
Engagement is about 3850. It revs to about 8000. Really good usable power for trail use. Seems to be "on the pipe" much more than with any other set up.
Hoping to see 90 mph on the dream o meter this season.