shaggyzr2
Active member
Hey....couple of bucks, How do the ice blue bulbs look in your sled? are they pretty bright?
Xtc 600
- Thread starter MURDER YAMAHA
- Start date
A couple of bucks
VIP Member
I like those the best so far. These are the same ones that I have.
https://www.ebay.com/itm/24-SMD-T10...206139&hash=item41cda5d55d:g:AF8AAOSw7cxZnp10
Like I mentioned in my previous post, get them w/ some form of cover around the led emitters. It is that which refracts and scatters the light. Hot/bright spots are pretty much eliminated as well.
And yes, they are P-L-E-N-T-Y bright.
https://www.ebay.com/itm/24-SMD-T10...206139&hash=item41cda5d55d:g:AF8AAOSw7cxZnp10
Like I mentioned in my previous post, get them w/ some form of cover around the led emitters. It is that which refracts and scatters the light. Hot/bright spots are pretty much eliminated as well.
And yes, they are P-L-E-N-T-Y bright.
Last edited:
Ok, thanks to Couple of Bucks, and some others, replaced my 8DF 600SRX stock track 39.6 lbs with this Hacksaw track at 33 lbs. Faster top end, and way better traction I'm sure, also replaced all bearings and seals on drive axle, jackshaft and chain case.
Attachments
Last edited:
Added a lighter weight brake disk from a Viper/SRX
A couple of bucks
VIP Member
The rotating mass just took a huge step in the right direction. That brake disk is a .5 lb savings ... at least!!
Vmax xtc 1997
Member
WOW!!!
looks awesome.
looks awesome.
shaggyzr2
Active member
I weighed my rotors before I put it on....7-8 oz less
shaggyzr2
Active member
shaggyzr2
Active member
I've got a set of ohlins rear shocks that would look good on that sled, I was thinking about selling them....
Shaggy, Pm me details about the shocks.
A couple of bucks
VIP Member
I see you supplemented the seal at the air filter:hood meeting point. Have you blocked off the warm air ports that are incorporated/molded into the hood?
Do every little thing you can to prevent steam from entering the intake. Steam = bog.
Do every little thing you can to prevent steam from entering the intake. Steam = bog.
That is actually factory Yamaha air filter, just took it out of the packaging yesterday.
Does have a weird color to the lower part though doesn’t it.
Does have a weird color to the lower part though doesn’t it.
A couple of bucks
VIP Member
The two foams look different. I added more "closed foam" to the hood. Just to make an even tighter seal.
https://totallyamaha.net/showthread.php/99487-97-Vmax-Powder-proof?highlight=Warm+air+tape
https://totallyamaha.net/showthread.php/99487-97-Vmax-Powder-proof?highlight=Warm+air+tape
Vincent
New member
Very nice! Must be sooo fast!
No idea !
Have yet to start it, just buttoning up a few more things.
Have yet to start it, just buttoning up a few more things.
Vincent
New member
Would 150+ hp be a reasonable guess on output?
I was told, well above 150..
Vincent
New member
100% believable! Nice build man.