Hello. Just blew the track yesterday on my 94 600 VMAX. Got a good deal locally on a 121x 15 x 1inch lug studded track from a 2004 600 h.o. skidoo. I'm hoping the 1 inch lugs aren't too tall, looks like plenty of room. Any help with dimensions for the holes would be greatly appreciated!!!!
Also. My secondary clutch is sticking. I have the oem secondary from my 2005 rx1, just missing the spring. Question: looks like the splines line up with the shaft, but it sticks out approximately 9/16 inch further than the oem. Can I simply machine the clutch 9r shaft to !ake this clutch work? And can I use my pink spring from my stock 94 VMAX form the rx1 clutch? VMAX is gyt twin piped and i was running on B2 settings. Thanks in advance for any/all help guys!
Also. My secondary clutch is sticking. I have the oem secondary from my 2005 rx1, just missing the spring. Question: looks like the splines line up with the shaft, but it sticks out approximately 9/16 inch further than the oem. Can I simply machine the clutch 9r shaft to !ake this clutch work? And can I use my pink spring from my stock 94 VMAX form the rx1 clutch? VMAX is gyt twin piped and i was running on B2 settings. Thanks in advance for any/all help guys!