Here is my sons 2001 Mountain Max 700 with Bender Pipes. It has eclectic start and reverse. We are going through everything to be sure it read for the season. Updating spindles to Viper to be able to add newer style skis. Here are a few images of us starting the process.
Nice! My favorite pipes in my favorite year MM.
Should be fun!!
Chaincase, secondary and suspension removed as well as speedo gear and bearing. Pulled drive shaft and dropped track. Also received bushings from McMaster-Carr for adding Viper Spindles.
Went through skid, made sure all was good as far as bearings, slides bushing etc.. went through chaincase with new bearings a shorter 68L chain. Found stripped lower gear bolt and broken speedo key. Reinstalled everything and tossed in the skid. Slowest making progress with Zach.
Ok here is the latest. Rebuild the entire front suspension minus the shocks. Have to keep my eyes open for some rebuildable shocks. All new bushings, painted as much as we could to make it look fresh. Also added Curve Skis, Viper spindles and my spacers. Worked out very slick.
Here is the final pictures of the MM700 that me and my son were getting ready for him to have some fun on. Looks great and runs like a top.
Sled Recap:
Ceramic Coated Bender Pipes
Jetting 150 mains 45 pilots
Rox adjustable Riser
Power Madd hand guards
New Curve Mountain Skis
Viper Spindles with spacer bushings
Stock gearing & drivers with reverse
2” Camoplast Track extended from 141”-144”
Electric start
Heel Clicker Clutching
Boss Seat
HID conversion kit - RoczToyz
Sled Recap:
Ceramic Coated Bender Pipes
Jetting 150 mains 45 pilots
Rox adjustable Riser
Power Madd hand guards
New Curve Mountain Skis
Viper Spindles with spacer bushings
Stock gearing & drivers with reverse
2” Camoplast Track extended from 141”-144”
Electric start
Heel Clicker Clutching
Boss Seat
HID conversion kit - RoczToyz
Last edited:
03viperguy
Moderator
Came out amazing!
Thank you!! Almost to nice to ride.
super1c
Super Moderator
Looks bad azz tom!
Thank you sir!!
Cool sled!
Thanks
Turned out great! Did these come with no coolant reservoir? What is the thing inline with the cap in the first pics near the head?
That’s an old temp sensor that I removed. Yea it has a coolant reservoir attached to the oil fill tank.
What paint did you use for the trailing arms?
I found a silver metallic at Walmart.
Have any left that you could take a pic of the can?
I think so. I’ll have to look tonight. Shoot me a message tonight and I’ll run out and grab a pic.