My Sons 2001 Mountain Max 700 refresh and upgrades.

Chaincase, secondary and suspension removed as well as speedo gear and bearing. Pulled drive shaft and dropped track. Also received bushings from McMaster-Carr for adding Viper Spindles.

IMG_5165 (Custom).JPEG

IMG_5166 (Custom).JPEG

IMG_5167 (Custom).JPEG

IMG_5168 (Custom).JPEG

IMG_5164 (Custom).JPEG
 
Went through skid, made sure all was good as far as bearings, slides bushing etc.. went through chaincase with new bearings a shorter 68L chain. Found stripped lower gear bolt and broken speedo key. Reinstalled everything and tossed in the skid. Slowest making progress with Zach.

IMG_5185.jpeg
IMG_5186.jpeg
IMG_5187.jpeg
IMG_5201.jpeg
IMG_5202.jpeg
IMG_5203.jpeg
IMG_5204.jpeg
 
Ok here is the latest. Rebuild the entire front suspension minus the shocks. Have to keep my eyes open for some rebuildable shocks. All new bushings, painted as much as we could to make it look fresh. Also added Curve Skis, Viper spindles and my spacers. Worked out very slick.

IMG_5271.jpegIMG_5270.jpegIMG_5283.jpegIMG_5284.jpegIMG_5285.jpeg
 
Here is the final pictures of the MM700 that me and my son were getting ready for him to have some fun on. Looks great and runs like a top.

Sled Recap:
Ceramic Coated Bender Pipes
Jetting 150 mains 45 pilots
Rox adjustable Riser
Power Madd hand guards
New Curve Mountain Skis
Viper Spindles with spacer bushings
Stock gearing & drivers with reverse
2” Camoplast Track extended from 141”-144”
Electric start
Heel Clicker Clutching
Boss Seat
HID conversion kit - RoczToyz


IMG_5438.jpegIMG_5437.jpegIMG_5436.jpegIMG_5435.jpegIMG_5432.jpeg
 
Last edited:
Turned out great! Did these come with no coolant reservoir? What is the thing inline with the cap in the first pics near the head?
 
You must log in or register to reply here.


Back
Top