srxguy
Member
Does anyone make a turbo for 2 strokes?....
Turbo?
- Thread starter srxguy
- Start date
kawirider00
New member
the problem with turbos on two strokes is the cases cant handle alot of boost with out blowing seals
Turbo
There use to be a place in Batavia,NY called Aerocharger.....I dont know if they are still around or not though. I know Bender racing is currently working on a turboed 2005 Mach Z so you might want to give them a call. They might be able to possibly custom make you something???? It would probably be some big $$$$ though.
There use to be a place in Batavia,NY called Aerocharger.....I dont know if they are still around or not though. I know Bender racing is currently working on a turboed 2005 Mach Z so you might want to give them a call. They might be able to possibly custom make you something???? It would probably be some big $$$$ though.
sxviper32
New member
what sled are you trying to turbo? here's a pic of a srx turboed.
yamaholic22
Active member
yea i was going to say aerocharger used to make them but i haven't heard anything from them in a couple of years.
kawirider00
New member
aerocharger makes benders turbos for the four strokes
sxviper32
New member
the srx pictured above is from powderlites. if you do turbo a srx, let me know what all you did. i might put one on my srx this summer. thanks!!!
03viperguy
Moderator
I can say that a friend owns a dyno company and has done a LOT of custom projects, and he says that it isnt worth it. says only place it is any good is in the mountains where it would make up for the altitude. he tried like hell to get it to work (has a turbo vette and pushed it to 700whp and 700wlbft in his garage) and just couldnt. just didnt always work right 
SpiderViper
New member
well it would b cool if you could get some kind of turb other than nitrous because i heard that it kills your engin.
03viperguy
Moderator
^^^^^ heh???
Junior
New member
and they've dropped development of the apex turbo's 'cause the mach is making bigger gains with less work...Brad said:
DoktorC
Member
Jr..I don't think that's the case...considering they are still developing their turbo grass sleds...a surprising number of them at that! I was talking to Gerry this weekend and he mentioned that the 4s kits are still much more popular..and has far more potential then the Mach.
03viperguy
Moderator
besides, the 4strokes can still handle boost a LOT better than the 2s.........
Junior
New member
03viperguy said:
this is your professional opinion?
03viperguy
Moderator
this is what I have found after knowing and talking to a guy that has built a few turbos, a few engines and a few drag sleds. he owns a dyno company and I really take his opinions in high regard. land&sea dynomite dynomometers 
Junior
New member
ready:
aim:
fire:
http://www.atlanticdda.com/engines/index.cfm
my mistake, I guess your buddy knows better than detroit diesel, and by proxy general motors, and mercedes, and in the near future dodge.
03viperguy said:this is what I have found after knowing and talking to a guy that has built a few turbos, a few engines and a few drag sleds. he owns a dyno company and I really take his opinions in high regard. land&sea dynomite dynomometers
aim:
fire:
http://www.atlanticdda.com/engines/index.cfm
my mistake, I guess your buddy knows better than detroit diesel, and by proxy general motors, and mercedes, and in the near future dodge.
cacsrx1
New member
When I put boost to a sled its gonna have a 1 piece crank and pressurized oiling system. Comparing a 2 stroke sled and a Detroit is like comparing apples and oranges.
03viperguy
Moderator
yes, exactly! and where are the 2 strokes, I didnt see them there. the bottom end of a 4 stroke yami is by far stronger than the bottom of a doo.
Junior
New member
have you ever seen an SRX or a viper spit out a crank? I don't spend much time in the doo's so I can't say, but I've seen R1's do it, that site has 4 or 5 2-stroke turbo's guys, ya it's not a direct comparison, but I'm saying it can and has been done, it's not impossible.