vmax3
New member
I am thinking of buying a set of AAen pipes for my 79SRX. Anyone have any thoughts on how much weight loss i can expect and how much HP I can gain over stock pipes??
snopro
New member
weight loss will be your largest bennefit with the Aaen pipes.
you will only see a slight power increase with stock porting but with ported cylinders, shaved heads and larger carbs you will see alot more power.
you will only see a slight power increase with stock porting but with ported cylinders, shaved heads and larger carbs you will see alot more power.
vmax3
New member
Aaen pipes
I think next year will be the year to completly overhall the engine, including porting, etc. I am hoping to get as much bang for my but with add on this year
I think next year will be the year to completly overhall the engine, including porting, etc. I am hoping to get as much bang for my but with add on this year
YAMMIEGOD3:16
Active member
VMAX3, AAEN BUILT NICE PIPE FOR THE SRX. MAKE SHURE YOU GET THE WILD PIPES. REMEBER THESE PIPES NEED ENGINE MODS TOO WORK, YOU SEE NOTHING ON A STOCK SRX JUST BOLTING THEM ON, MATTER OF FACT YOU WILL GO SLOWER. AAEN PIPES WORK BEST WITH FULL MOD RACE PORTING , CUT HEADS, .44 CARBS , RACE FUEL , AND SPINNING MOTOR AT 10,200. THAN YOU WILL SEE DEFFERENCE. HORSEPOWER WILL 105/106 AREA !! 3:16 (tony)
77srx440
New member
- Joined
- Apr 10, 2004
- Messages
- 48
mark , looking to make that 79 run like my 77
I have some pipes for you when your ready to start playing. you need to scrap the 79 top end. I have a 77 top end that i will sell you. mine has 120+ hp so you have your work cut out for you.

vmax3
New member
Pipe
Tell me more about what to expect from your pipes and your heads. I am interested for sure.
Tell me more about what to expect from your pipes and your heads. I am interested for sure.
vmax3
New member
77
By the way do I know you?????????????????????????
I think I do.
By the way do I know you?????????????????????????
I think I do.
77srx440 said:mark , looking to make that 79 run like my 77I have some pipes for you when your ready to start playing. you need to scrap the 79 top end. I have a 77 top end that i will sell you. mine has 120+ hp so you have your work cut out for you.
77srx440
New member
- Joined
- Apr 10, 2004
- Messages
- 48
yes you do.
paul at performance specialties. make a list of parts that you will need .I should have it all in the attic of the shop.can get you over 100 hp easy. might even sell you a 77 chassis.

vmax3
New member
Srx
Paul,
Check your PM box.
Paul,
Check your PM box.
77srx440 said:yes you do.paul at performance specialties. make a list of parts that you will need .I should have it all in the attic of the shop.can get you over 100 hp easy. might even sell you a 77 chassis.
77srx440
New member
- Joined
- Apr 10, 2004
- Messages
- 48
you have message back.. for the right price we could just pull my engine out and drop it in your chassis 

vmax3
New member
My wallet
I dont my wallet can handle that, let alone my forehead when my wife puts the frying pan against it.
I dont my wallet can handle that, let alone my forehead when my wife puts the frying pan against it.
77srx440 said:you have message back.. for the right price we could just pull my engine out and drop it in your chassis![]()
77srx440
New member
- Joined
- Apr 10, 2004
- Messages
- 48
I hope you don't have any big case iron fry pans in the house. we can always make two slips , one for the wife to see and one to hide........ 

hman
Member
I would be interested in your 77 SRX top end.I would be using it on a 79 bottom end so I am curious as to witch pistons come with it?