rockin rob
New member

i have followed the instructions to a T and the result is the same. Fast and hard pulling, but incredible loss of top speed. I have called Super torqu for tech help and they have given me over 5 different things to try. everytime you call they have a new solution just updated. but evertime you change the configurations, its the same result, hit top speed and then it drops until it can hardly hold 90mph.
I was told by the manufacturer that the springs get heat soaked fast and loose their strength and top speed is lost.
any suggestions?
i have graphed all of my results, and I am ready to pitch them in the garbage. $300 x 2 for my sleds, in the garbage can. It seems that what you get in the acceleration is lost in the top. I have called their tech line and asked for help, and when it doesnt work, they stop answering. I have heard that this is a common problem many have had with them. it isnt proven reliable. so they will not stand behind their products.
i am planning to put a 1.25 inch rip saw on the srx and go 8 tooth non ratchet driver and stud it (re-geared) that is why i want to get the heel clickers to work so I can compenste the bigger lug and loss of power with more aggressive clutching.
ps i have tried many of the set ups in TY with the same results, springs die out after a half mile of WOT. i have so many hours playing and testing, that i give up! I have clutched a lot in my 20 years off riding, never with such inconsistancies or lack of success
Rob