Show off your Yamaha

[Keith1962]

My 2001 Venture ready for snow.

 

[msr110]

north west pennsylvania

 

[A couple of bucks]

NIIIIIIIIICE JOB. What are the red decals from?

 

[Keith1962]

NIIIIIIIIICE JOB. What are the red decals from?

They came from A&M Graphics in Auburn NY. They are printed, rather than being cut from separate color vinyl sheets. They are not quite what I was expecting, but I like them.

 

[chadderbox235]

 

[chadderbox235]

Hey time bomb I live in star lake c 8 goes right through my yard! You can come up and ride anytime . plenty of room in my driveway for trailer. ('bout an hrs. drive.)

 

[pete72]

my 87 exciter ready to stretch its legs

 

[03viperguy]

Looks clean!

 

[devinzz1]

How havent i posted on this thread before? Anyways. My 97 700

 

[A couple of bucks]

Looks clean!

Certainly does. I've always like those. There just so innocuous looking.......until you squeeze the throttle!!

 

[Batwolf]

Poured redbull in the tank

 

[sx viper]

Here is my 2002 viper er with some mods

 

[Viktory2k1]

Batwolf, I'd love to see the video of that! 2002 Viper,are those headlight covers or a reflection off hood. They seem to have a tint of blue. Nice

 

[YooperWoods]

Here is my 2002 viper er with some mods

Hei kollegani Suomalainen. Minun isoisä oli syntynyt Suomessa, sukunimeni on Pyykola.

No I don't speak Finn, used a translater. Lots of Finns in my area, Maki is the most common last name lol. Beautiful Viper you got!

 

[sx viper]

Hei kollegani Suomalainen. Minun isoisä oli syntynyt Suomessa, sukunimeni on Pyykola.

No I don't speak Finn, used a translater. Lots of Finns in my area, Maki is the most common last name lol. Beautiful Viper you got!

Well ,hello.
It is nice to hear. I haven't heard that there live many Finns, but always hear new things.

And Viktory2k1 those are light blue headlight covers.

 

[A couple of bucks]

Here is my 2002 viper er with some mods

Do you have a widening kit on the front. She looks really nice.

 

[sx viper]

Thanks. Yyep, home made widening kit with 43" stance and 18,9" fox floats

 

[amzoil72]

 

[Viktory2k1]

Now that is sweet amzoil72, I see you're wearing a gopro, any videos? I wonder if they make covers and front end kits for my srx. Never really looked into it. Would I still be able to use my ohlins? Oh, I reread, home made. What did you use for the radius rods? Just some threaded tube? Now I have to make something like that. Did you have to do anything with the rear trailing arm mounts or did the rubber flex enough? 43" c to c or inner ski measurement, Gonna go measure... OK i'm 41 and some change c to c. Adding an inch to each side doesn't seem like too much of a project. I could probably use something like straight thread hex bushings or something. hmmm.

 

[amzoil72]

i only have one downloaded, youtube search 1971 yamaha ss433.
http://youtu.be/kY1yc-JVlWg