Everything went ok, but I'm not sure if my cables are stretched or what. I took apart the whole power valve assembly including the cables ends attached to the PV's. Then I put it all together and used the bender tool to open the powervalves. I felt up the exhaust ports to make sure all ports were flush and had to adjust the cables at the servo. 2 of the cables needed to be screwed all the way into the servo housing to make the PV's flush with the cylinders. Are the cables stretched? I'm kinda concernd because with the cables adjusted all the way in, I have no adjustment left if they need it again.
any help is appreciated!
any help is appreciated!