wanted clutch alignment tool or dimensions

Concept Carbon

Concept Carbon

New member
Joined
Jan 31, 2006
Messages
1,188
Age
45
Location
Ottawa, ON.
Hi, im looking to buy or borrow(preferibly borrow) someones clutch alignment tool,

or if some one can give me a detail drawing of one, I could make one or possibly a couple at work.

thanks jay
 
legal jazz

I the creator of this material Iain Hutchinson permit it's use by any individual. This material may not be used for production of items for sale. This material may be modified, provided that credit for the original design is given, and that at no point will any material based from this be sold.

I hold no resposibility for personal or property damage resulting in the use of this material, use at your own risk.

By viewing and/or utilizing this material in any fashion you agree to these terms.
_______________________________________________________________________

/legalspeak

or in short, it's not my fault if you hurt yourself or your stuff, you can use it for whatever you want, just gimme credit. and NO SELLING IT or parts made from it. I'm doing this for the good of the community, not to help someone make money.



operating instructions. pretty self explanatory, loosen the motor mount bolts, slide one end over the secondary shaft, drop the other end over the primary crank stub, jiggle it until both chamfers on both shafts are touching on both side, voila, clutch alignment done.
 
thanks, im having som edificulty making out some of the numbers can you tell my the numbers from left to right,
looks to me like
30,10,40,320.5,????,20,15


thanks Jay
 
hmmmm, I'll get a bigger shot of it, that was supposed to come out as a scale model, I guess not tho. There's also an IGES cad model at the link that I listed, if you have some software that can view it.
 
You must log in or register to reply here.


Back
Top