Concept Carbon
New member
Hi, im looking to buy or borrow(preferibly borrow) someones clutch alignment tool,
or if some one can give me a detail drawing of one, I could make one or possibly a couple at work.
thanks jay
or if some one can give me a detail drawing of one, I could make one or possibly a couple at work.
thanks jay
Junior
New member
I can make you up a print for one later today. Can you take it as a CAD file or do you need a blueprint?
Concept Carbon
New member
cool, cad is fine, thanks jay
Junior
New member
Junior
New member
legal jazz
I the creator of this material Iain Hutchinson permit it's use by any individual. This material may not be used for production of items for sale. This material may be modified, provided that credit for the original design is given, and that at no point will any material based from this be sold.
I hold no resposibility for personal or property damage resulting in the use of this material, use at your own risk.
By viewing and/or utilizing this material in any fashion you agree to these terms.
_______________________________________________________________________
/legalspeak
or in short, it's not my fault if you hurt yourself or your stuff, you can use it for whatever you want, just gimme credit. and NO SELLING IT or parts made from it. I'm doing this for the good of the community, not to help someone make money.
operating instructions. pretty self explanatory, loosen the motor mount bolts, slide one end over the secondary shaft, drop the other end over the primary crank stub, jiggle it until both chamfers on both shafts are touching on both side, voila, clutch alignment done.
I the creator of this material Iain Hutchinson permit it's use by any individual. This material may not be used for production of items for sale. This material may be modified, provided that credit for the original design is given, and that at no point will any material based from this be sold.
I hold no resposibility for personal or property damage resulting in the use of this material, use at your own risk.
By viewing and/or utilizing this material in any fashion you agree to these terms.
_______________________________________________________________________
/legalspeak
or in short, it's not my fault if you hurt yourself or your stuff, you can use it for whatever you want, just gimme credit. and NO SELLING IT or parts made from it. I'm doing this for the good of the community, not to help someone make money.
operating instructions. pretty self explanatory, loosen the motor mount bolts, slide one end over the secondary shaft, drop the other end over the primary crank stub, jiggle it until both chamfers on both shafts are touching on both side, voila, clutch alignment done.
Concept Carbon
New member
thanks, im having som edificulty making out some of the numbers can you tell my the numbers from left to right,
looks to me like
30,10,40,320.5,????,20,15
thanks Jay
looks to me like
30,10,40,320.5,????,20,15
thanks Jay
Junior
New member
hmmmm, I'll get a bigger shot of it, that was supposed to come out as a scale model, I guess not tho. There's also an IGES cad model at the link that I listed, if you have some software that can view it.
nailsandrails
VIP Member
What program is needed to open this type of file. I see there are a few out there, but what is the most commonly used?