Just wonderin about how much would it cost to have a track replaced on a 97 vmax 600 xtc. Labor and the cost of the track? Also I cannot find the size of my track any help would be greatly appreciated thank in advance.
BigMan76
Member
Call Bruce @ CB Performance (site sponsor)-they are great for tracks!!!!
Just had a track done on a 97 XTC by CB, great guys, work appears to be top notch, Hard to say what the exact price was becasue I had 2 sleds done w/ tracks, tune ups, shock rebuilds etc.
2ooosrx
VIP Member
- Joined
- Oct 2, 2004
- Messages
- 2,414
- Age
- 36
- Location
- Gurnee, Illinois
- Website
- www.cbperformanceparts.com
about $450.00 labor and new track. The track you have is 15x121x.92
Bruce
Bruce
Canuck
New member
I didn't realize that they ran the .92" track on the early XTC's, I thought they had the standard .625" lug.
Thanks alot Bruce!!!! And all!!! I will need it done next fall for sure. I am going to try to get one more year out of it. I have 2 stud pops and it is the original track. Thanks again
I found it. track deflection is 0.98-1.18. IF I went with a 1 inch could I still stud it or would it rub? Thanks
FuzzButt
New member
1 inch with studs is fine as long as the protectors are there.
If your a bit mechanically inclined and have the room and tools then a track swap is really not that hard. I did it alone in my garage in about 2 1/2 hours.
If your a bit mechanically inclined and have the room and tools then a track swap is really not that hard. I did it alone in my garage in about 2 1/2 hours.