Help hyfax screw sheard off

ReaperSRX

Member
Joined
May 26, 2003
Messages
589
Age
53
Location
New Liskeard, Ontario
Hey guys, i found out what was causing the binding in the front of my skid. One of the hyfax screws let go causing the hyfax to drop a little, i guess i was lucky it didn't come off! Anyway now what?.............I have read about drilling out and using nut and bolt. Could somebody give details or better yet post pictures.............thanks...........James
 
silversnow said:
Drill it and tap to a bigger size.

Snow Please!!!!!!!!!
you cant do that its not wide enuff.. mine did the exact same thing ..i was forced to move down a half inch and drill and tap a new hole!.when you get new hyfax you have to drill a new hole in that two
 
100_0521.jpg
 
Last edited:
I started explaining it, then thought..I will just take a picture!

That job was a quicky..I had guys waiting on me. That is what happends when you wait till the last minute. But worked good.
 
Got it all done, didn't take to long. I did have some issues on the rail that the screw was sheard off but in the end i got it to work. DoN'T know why with all engineering might at Yamaha they didn't come up with this to make it a little easier on the end user.................James
 
Last edited:


Back
Top