2000 SXR 700 (Rejetting a high miler?)

xsivhp

Active member
Joined
Dec 11, 2004
Messages
1,537
Age
55
Location
Eau Claire, WI
What do people think of jetting down a engine with 9200 miles on it - do you think it will affect reliability?

Thanks,

xs
 
Why not just do a qwick topend job,if the pistons are good you'll just
need rings...if the sled is in great condition it'll be woth it..
 
Dude's tight on $ and the sled is beat appearance wise - although it does run good, and we completely went thru the rear skid and put a ice ripper on it last year.
 
I rejetted my 98 XTC 700 and reclutched it, he likes the way it runs so we'd like to get it set up as close as we can to my XTC with out peeling the head gaskets.
 
Yea if he's running rich he can jet down some but keep an eye on wash
and plug color,for clutching go to the tech pages for that or ask turk,
lotsa info here..

but i don't know if i would be beeting on a sled with over 9k or not,i wouldn't
 
daman said:
Yea if he's running rich he can jet down some but keep an eye on wash and plug color,for clutching go to the tech pages for that or ask turk, lotsa info here.. but i don't know if i would be beeting on a sled with over 9k or not,i wouldn't
I was wondering about the beating part too - lol!
 


Back
Top