after reading all the ideas on this thread to stop darting,I did the shim thing to my ski rubber....3/16 " thick piece of hyfax cut 2" long, glued on with contact cement.
also shimmed the lower radius rods plastic outer bushings with 2 layers of miller lite beer can aluminum shim stock.
I wrapped the shim stock around the steel sleeve and slipped the 2 plastic bushings over it ...thats how much free play there was.
I went back to the same trail I was on before to test the fix.
These 2 things almost completely eliminated the darting.
I run 7.5" shaper bars.
I am set at about 1/2" total toe out on the skis.
Thanks TY!
also shimmed the lower radius rods plastic outer bushings with 2 layers of miller lite beer can aluminum shim stock.
I wrapped the shim stock around the steel sleeve and slipped the 2 plastic bushings over it ...thats how much free play there was.
I went back to the same trail I was on before to test the fix.
These 2 things almost completely eliminated the darting.
I run 7.5" shaper bars.
I am set at about 1/2" total toe out on the skis.
Thanks TY!
Last edited: