Drop Brackets

Viper Treats

Viper Treats

New member
Joined
Feb 21, 2005
Messages
431
Age
52
Location
Appleton, WI
Are the drop brackets your selling for the proactions stainless? Just wondering because I installed a SC10 III in a viper and I don't have any ski pressure because the sled is sitting too level. I thought a drop bracket on the rear suspension mount would help correct this. I would need to modify the drop bracket for the ski-doo skid, and if its stainless it is harder to modify, unless you guys would be willing to do that for me if I gave you what I need. Thanks.
 
The drop brackets are made from aluminum so they should be fairly easy to modify. If you would like we can do it for you but it will cost a little extra depending on the time that goes into modifying. Let me know what you want to do. Thanks
 
2ooosrx said:
The drop brackets are made from aluminum so they should be fairly easy to modify. If you would like we can do it for you but it will cost a little extra depending on the time that goes into modifying. Let me know what you want to do. Thanks
Click to expand...

The rear suspension bolt in the SC10 is larger, so I can just drill that out per the size I need when i get them. If I understand correctly how the bracket works, the skid shaft slides into that slot milled out over the two holes? If I get the shaft size for you, we will know if I need to have that milled out larger. That would be the only thing difficult for me to change. I will get the shaft size tomorrow and get back to you.
 
The collar on the doo skid rear shaft is 1 1/2" diameter. If I am correct, that size would need to fit into the slot milled out over the two holes on the bracket.
 
I just measured the part that you are referring to and it has a diameter of 1.495" which is just under 1 1/2". I am not sure how acccuratly you measured it so let me know if you think we should widen it up a little bit or not. Thanks
 
I think it will work. It was actually just under 1 1/2". If I have trouble I will just take it to work and have someone mill it out for me. Was I correct on how those brackets work? Do you take paypal?
 
You must log in or register to reply here.


Back
Top