daman New member Joined May 2, 2003 Messages 10,569 Age 55 Location Bad Axe,Michigan Jan 30, 2007 #1 where is it on this sled?... pinned she'll go to 7500 then climb to 8000. Last edited: Jan 30, 2007
FuzzButt New member Joined Dec 5, 2003 Messages 694 Location Waterford, Michigan Jan 30, 2007 #2 Sounds about right. My '97 600 runs 8200 then drops down a bit and starts inching up to 7900 or so. 7800 is the sweet spot for the twins.
Sounds about right. My '97 600 runs 8200 then drops down a bit and starts inching up to 7900 or so. 7800 is the sweet spot for the twins.
daman New member Joined May 2, 2003 Messages 10,569 Age 55 Location Bad Axe,Michigan Jan 30, 2007 #3 Thats what i was thinking around 78-8000 i'll leave it there then,seems to pull good so..thanks FB.
FuzzButt New member Joined Dec 5, 2003 Messages 694 Location Waterford, Michigan Jan 30, 2007 #4 Ya there are a lot of posts about the 600 twin's power band being at 7800. I've spun mine up to 8300 a few times after my rebuild and before I replaced the weights. It sure sounds sweet at that speed.
Ya there are a lot of posts about the 600 twin's power band being at 7800. I've spun mine up to 8300 a few times after my rebuild and before I replaced the weights. It sure sounds sweet at that speed.
F flying dutchman Member Joined Aug 7, 2003 Messages 124 Location Red Deer Jan 31, 2007 #5 yes 7800 is where you want to be. After that it starts losing power. In the first year, I experimented lots with my MM. I even had a few dyno sheets that show all that, just a matter of finding them.
yes 7800 is where you want to be. After that it starts losing power. In the first year, I experimented lots with my MM. I even had a few dyno sheets that show all that, just a matter of finding them.
daman New member Joined May 2, 2003 Messages 10,569 Age 55 Location Bad Axe,Michigan Jan 31, 2007 #6 Cool thanks dutch..
pro116 Lifetime VIP Member Joined May 7, 2003 Messages 2,764 Age 44 Location Appleton,WI Jan 31, 2007 #7 I ran mine at 7800 grass darging and trail riding that where it ran fastest.
daman New member Joined May 2, 2003 Messages 10,569 Age 55 Location Bad Axe,Michigan Jan 31, 2007 #8 Thanks pro..
daman New member Joined May 2, 2003 Messages 10,569 Age 55 Location Bad Axe,Michigan Jan 31, 2007 #9 Also??? Would that apply to 500's as well? the wifes dlx runs about the same tops at 78-79 pulls damn good for a small mill
Also??? Would that apply to 500's as well? the wifes dlx runs about the same tops at 78-79 pulls damn good for a small mill
pro116 Lifetime VIP Member Joined May 7, 2003 Messages 2,764 Age 44 Location Appleton,WI Jan 31, 2007 #10 yes the 500's also like 7800
daman New member Joined May 2, 2003 Messages 10,569 Age 55 Location Bad Axe,Michigan Jan 31, 2007 #11 ...