95-vmax
New member
- Joined
- Jan 23, 2006
- Messages
- 24
Hi..
i have a 96 vmax only reaching 7000 rpm/70 mph
i have 3 pri-springs only thing they seem to change is the engagment..
3500
3700
4100
i played with the sec angle 50 and 60 didn't do anything i noticed.
all stock with Carbon tech reeds..
carb niddle 1 washer on top, other bottom.. clip on 2
jet is stock
compression test 120/120
runs very smooth.. just no top end..
any timming adjustments on this motor??
lift the carb niddle more??
thanks in advance
i have a 96 vmax only reaching 7000 rpm/70 mph
i have 3 pri-springs only thing they seem to change is the engagment..
3500
3700
4100
i played with the sec angle 50 and 60 didn't do anything i noticed.
all stock with Carbon tech reeds..
carb niddle 1 washer on top, other bottom.. clip on 2
jet is stock
compression test 120/120
runs very smooth.. just no top end..
any timming adjustments on this motor??
lift the carb niddle more??
thanks in advance
700triple
Member
Your primary seem to be overloaded. Try with 5 gram less in your weights and keep your secondary stock. You will see if this is the trouble.