moss
New member
My Belt is abit low in the secondary, and I wanted to Adjust this to be just .5mm above the top of the Secondary. Would I add Shims on the back 3 screws, or take out Shims? Also, where do I get the shims from? Dealer I guess?
daman
New member
Dealer...
Add..
Add..
You would add shims to raise the belt. I found some metric washers at my local hardware store that matched up good. Just try to keep the thickness the same on all 3.
moss
New member
Perfect thanks Guys...I know its a simple thing, but just wanted to be clear.
daman
New member
nothing wrong with that..moss said:
bluemonster1
LIFE MEMBER ONLY ONCE!!!
yeah I put 1 set of washers to raise my belt a tad.Getting a slight squeal from the belt,but it is a newer one.Track turns with jerking motion when up on stand.No burn marks on the clutch.